Hitachi RPIL-3.0UFE1NH Service Manual page 7

1 . O P T I O N L I S T
1 . O P T I O N L I S T
LCD screen
Mode indication area,which indicate
the current operation mode
Display room temperature
/set temperature
Parameter revision indicator
Electric heater indicator
Button lock indicator
Defrost indicator
Operation mode
Cooling mode
Heating mode
Dry mode
Fan mode
Auto mode
Temperature display
Room temperature
Set temperature
NOTE
:
1. Heating and electric heating function are not available for single cooling only models.
2. Air direction, Filter Cleaning
For details, please refer to the operation manual.
3. Custom-setting parameters must be configured by installer or authorized person
Basic operation
This wired controller should be used with the air conditioner, it can be used for cooling,
heating, drying and fan etc. For other functions and settings, please refer to the
specific operation in this manual
1. Turning ON/OFF
Press the button, the appliance will be started or stopped.
2. Mode setting
Press " " button to select operation mode.
Each time MODE button is pressed, the operation mode will change in the following sequence:
COOLING
:
AUTO mode is invalid for models without AUTO mode when setting.
HEATING mode is invalid for cooling only types or heating-forbidden air conditioners.
Timer setting
Fan speed setting
(flickering) Auto fan speed
Ultrahigh fan speed
High fan speed
Medium fan speed
Low fan speed
Ultralow fan speed
Fahrenheit Temperature
Floor Heat, Electric Heating etc. are only available for specific models.
,
.
DRY FAN ONLY
5
Filter cleaning indicator
Timer setting
Timer ON
Timer OFF
Timer setting valid only once.
Timer setting valid only for one day.
Timer setting set for a week.
.
HEATING
AUTO
Clock
Up/Down airflow swing
Left/Right airflow swing
Fan speed display
Error Indicator
Sleep indicator