Hitachi RPIL-3.0UFE1NH Service Manual page 39

4. DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
4.0HP/5.0HP
Important: Before disassembly and assembly, make sure that the power to the system has
been disconnected and verified as voltage free.
Step
1. Remove
external casing
2. Remove motor
3. Remove
compressor
4. Assemble unit
Illustration
37
Handling Instruction
1. Remove the top cover, handle
and valve cover;
2. Remove the outer case and right
side plate.
1. Remove the blade nut and then
remove the blade;
2. Remove the motor from motor
supporter.
1. Reclaim the refrigerant from the
entire system;
2. Unsolder the 4-way valve piping
assy from compressor;
3. Remove the compressor
mounting bolts;
Carefully remove the compressor
from chassis.
Assemble the unit in the reverse
order of disassembly.