Hitachi RPIL-3.0UFE1NH Service Manual page 40

4 . DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
6.0HP/6.5HP
Important: Before disassembly and assembly, make sure that the power to the system has been
disconnected and verified as voltage free.
Step
1. Remove external
casing
2. Remove motor
3. Remove gas liquid
separator
4. Remove compressor
5. Assemble unit
Illustration
38
Handling Instruction
1. Remove the top cover,
handle and valve cover;
2. Remove the outer case and
right side plate.
1. Remove the blade nut and
then remove the blade;
2. Remove the motor from
motor supporter.
1. Reclaim the refrigerant
from the entire system;
2. Unsolder the 4-way valve
piping assy from gas liquid
separator;
3. Remove the gas liquid
separator.
1. Reclaim the refrigerant from
the entire system;
2. Unsolder the 4-way valve
piping assy from compressor;
3. Remove the compressor
mounting bolts by using
hexagon socket;
4. Carefully remove the
compressor from chassis.
Assemble the unit in the
reverse order of
disassembly.