Hitachi RPIL-3.0UFE1NH Service Manual page 46

4. DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
Step
4. Disassembly
of the motor
shaft
5. Disassembly
of the motor
(3.0HP)
5. Disassembly
of the motor
(3.5/4.0HP)
Removal of the motor
Illustration
44
Handling instruction
Remove the 2 screws fixing the motor
shaft and fan blade by allen screwdriver.
Remove the fasteners between the up
shell and the below shell;
Take out of the motor and centrifugal fan
blade;
Remove the 2 screws fixing the centrifugal
fan blade and get the motor.
Remove the fasteners between the up
shell and the below shell on both sides of
the motor;
Remove the 2 screws fixing the
crosshead and take it away from the
motor;
Take out of the motor and centrifugal fan
blade;
Remove the 2 screws fixing the
centrifugal fan blade and get the motor.