Table of Contents
Advertisement
CHAPTE R
2
M AKE AND M ODEL COM PATIBILITY
The Raven Rate Control M odule (RCM ) - Sprayer is a product control system which allows for precise boom
section control during sprayer application. The RCM - Sprayer controls the existing AGCO ProStop-E valves to
create up to 36 sections across the boom width, giving the user consistent spray coverage and product control.
RCM - Sprayer is built on the ISOBUS communication platform which allows the system to work with most ISO
Universal Terminals (UTs) and task controllers, including the Viper® 4.
This manual is intended to provide installation instructions on the following equipment:
Compatible Equipment Information
TABLE 1.
M ake and M odel
AGCO RoGat o r C- Series
(RG900, RG1100, RG1300)
SECTION SPACING
The information located in Table 2 on page 6 and in Table 3 on page 7 is required for the machine configuration
process on the Universal Terminal. Refer to the RCM - Sprayer Calibration and Operation M anual, section
Calibration Wizard, for additional machine assistance with system setup or operation.
N OTE:
Each column shown in Table 2 on page 6 and in
configuration. Boom width, in feet, is the first number. Nozzle spacing, in inches, is the second
number. As an example, a 90 foot boom with 10 inch nozzle spacing will be represented as 90'/ 10".
Introduction: M ake and M odel Compatibility
I NTRODUCTION
C H A P T E R 2
Boom
N ozzle
Sect ions
Body
Pro St o p - E
35/ 36 Sect io ns
Com p at ib le
RCM - Sprayer
Raven RCM - Sp rayer
AGCO RCM - Sp rayer
Table 3 on page 7 identifies a specific sprayer boom
Kit N umber
117- 7100- 038
117- 7100- 037
5
Advertisement
Table of Contents
