Checking Fluid Levels; Engine Oil; Checking The Engine Oil Level - Kia CADENZA 2020 Owner's Manual

Hide thumbs Also See for CADENZA 2020:
Table of Contents

Advertisement

Maintenance

CHECKING FLUID LEVELS

When checking engine oil, engine
coolant, brake fluid, and washer fluid,
always be sure to clean the area
around any filler plug, drain plug, or
dipstick before checking or draining
any lubricant or fluid. This is espe-
cially important in dusty or sandy
areas and when the vehicle is used
on unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt
and grit from entering the engine and
other mechanisms that could be
damaged.
7
18

ENGINE OIL

Checking the engine oil level

Lambda II 3.3L GDI (Gasoline engine)
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to
reach normal operating tempera-
ture.
3. Turn the engine off and wait for a
few minutes (about 5 minutes) for
the oil to return to the oil pan.
4. Pull the dipstick out, wipe it clean,
and reinsert it fully.
WARNING
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may
be hot enough to burn you.
5. Pull the dipstick out again and
check the level. The level should
be between F and L.
CAUTION -
OYG070007N
Do not overfill the engine oil. It
may damage the engine.
- Radiator hose
Replacing
engine oil

Advertisement

Table of Contents
loading

Table of Contents