Blind-Spot Collision Warning (Bcw); System Description - Kia CADENZA 2020 Owner's Manual

BLIND-SPOT COLLISION WARNING (BCW) / BLIND-SPOT COLLISION-AVOIDANCE
ASSIST (BCA) (IF EQUIPPED)

System description

Blind-Spot Collision Warning
Blind-Spot Collision Warning uses
radar sensors in the rear bumper to
monitor and warn the driver of an
approaching vehicle in the driver's
blind spot area.
1) Blind-Spot Area
It warns by detecting the vehicles in
the blind spots. The blind spot detec-
tion range varies relative to vehicle
speed.
Note that if your vehicle is traveling
much faster than the vehicles around
you, the warning will not occur.
2) Closing at high speed
BCW feature will alert you when a
vehicle is approaching in an adjacent
lane at a high rate of speed. If the
driver activates the turn signal when
the system detects an oncoming
vehicle, the system sounds an audi-
ble alert.
OON058042L
Blind-Spot Collision-Avoidance
Assist
OON058043L
Blind-Spot
Assist detects the front lane through
the camera installed on the upper
front windshield and detects the
side/rear areas through rear corner
radars.
BCA may activate the Electronic
Stability Control (ESC) in accor-
dance with a colliding possibility with
an approaching vehicle while chang-
ing lanes. It is to lower the colliding
risk or mitigate the colliding damage.
Driving your vehicle
OUM058414
Collision-Avoidance
5 71