Kia CADENZA 2020 Owner's Manual page 221

Adjusting the driver and passenger
side temperature equally
• Press the "SYNC" button to adjust
the driver and passenger side tem-
perature equally.
The passenger side temperature
will be set to the same temperature
as the driver side temperature.
• Adjust the driver side temperature
control switch. The driver and pas-
senger side temperature will be
adjusted equally.
Adjusting the driver and passenger
side temperature individually
• Press the "SYNC" button again to
adjust the driver and passenger
side temperature individually. The
illumination of switch turns off.
• Operate the driver side tempera-
ture control button to adjust the
driver side temperature.
• Operate the passenger side tem-
perature control switch to adjust
OYG049350
the passenger side temperature.
Temperature conversion
You can switch the temperature
mode from Centigrade to Fahrenheit
as follows:
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The display
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.
Air intake control
■
■
will change from
This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.
Features of your vehicle
Type A
Type B
OYG049351
OYG049362
4 139