System Setting And Activation - Kia CADENZA 2020 Owner's Manual

Hide thumbs Also See for CADENZA 2020:
Table of Contents

Advertisement

Driving your vehicle
WARNING
• Always be aware of road con-
ditions while driving and be
alert for unexpected situa-
tions even though Blind-Spot
Collision Warning and Blind-
Spot
Collision-Avoidance
Assist are operating.
• Blind-Spot Collision Warning
and
Blind-Spot
Avoidance Assist are supple-
mental systems to assist you.
Do not entirely rely on the sys-
tems. Always pay attention,
while driving, for your safety.
• Blind-Spot Collision Warning
and
Blind-Spot
Avoidance Assist are not sub-
stitutes for proper and safe
driving. Always drive safely
and use caution when chang-
ing lanes or backing up the
vehicle. Blind-Spot Collision
Warning
and
Collision-Avoidance
may not detect every object
alongside the vehicle.
5
72

System setting and activation

System setting
• The driver can activate the system
by
placing
START/STOP button to the ON posi-
tion and by selecting "Settings 
Vehicle  Driver Assistance 
Blind-Spot
Infotainment System screen.
- BCA and BCW turn on and get
Collision-
ready to be activated when
"Active Assist" is selected. Then,
if a vehicle approaches the dri-
ver's blind spot area a warning
sounds or braking power is
applied.
- BCW turns on and gets ready to
Collision-
be activated when "Warning
Only" is selected. Then, if a vehi-
cle approaches the driver's blind
spot area a warning sounds.
- The system is deactivated and
the indicator on the Blind-Spot
Safety button is extinguished
Blind-Spot
when 'Off' is selected.
Assist
the
ENGINE
Safety"
in
the
• If you press the Blind-Spot Safety
• If you press the Blind-Spot Safety
OYG050317N
button while "Active Assist" or
"Warning Only" is selected the indi-
cator on the button extinguishes
and the system deactivates.
button while the system is can-
celled the indicator on the button
illuminates and the system acti-
vates. In this case, the system
returns to the state before the
engine turned off. When the sys-
tem is initially turned on and when
the engine is turned off then on
again while the system is in activa-
tion, the warning light will illumi-
nate for 3 seconds on the outside
rearview mirror.

Advertisement

Table of Contents
loading

Table of Contents