Table of Contents
Advertisement
BLIND-SPOT VIEW MONITOR (BVM) (IF EQUIPPED)
■ Left
■ Right
Blind-Spot View Monitor displays the
rear and side views of the vehicle on
a center cluster screen upon the dri-
ver's activation of the turn signal.
To turn on BVM : Under condition
BVM is enabled in the settings
(1) The Engine Start/Stop button is
turned to the ON position.
(2) The turn signal is activated
(When Hazard warning switch is
pushed on, BVM deactivates.)
To turn off BVM
OYG040650N
(1) The Engine Start/Stop button is
turned to the OFF position.
(2) The turn signal is deactivated
(3) A warning screen pops up and
takes priority over BVM.
OYG040649N
Driving your vehicle
WARNING
• Blind-Spot View Monitor is a
supplemental system only. It
is the responsibility of the
driver to always check the
area around the vehicle before
and while making turns or
moving lanes.
• ALWAYS look around your
vehicle to make sure there are
no
objects
or
obstacles
before moving the vehicle in
any direction to prevent a col-
lision.
• Objects are closer than they
appear. Failure to visually
confirm that it is safe to
change lanes before doing so
may result in a crash and seri-
ous injury or death.
• Always keep the camera lens
clean. The camera may not
work properly if the lens is
covered with foreign material.
5 93
Advertisement
Chapters
Table of Contents
