Table of Contents
Advertisement
Features of your vehicle
WARNING
Before programming HomeLink
to a garage door opener or gate
operator, make sure people and
objects are out of the way of the
device to prevent potential
harm or damage. Do not use the
HomeLink
®
with any garage
door opener that lacks the safe-
ty stop and reverse features
required by U.S. federal safety
standards (this includes any
garage door opener model man-
ufactured before April 1, 1982).
A garage door that cannot
detect an object - signaling the
door to stop and reverse - does
not meet current U.S. federal
safety
standards.
garage door opener without
these features increases the
risk of serious injury or death.
4
56
Programming HomeLink
Please note the following:
®
• When programming a garage door
opener, it is advised to park the
vehicle outside of the garage.
• It is recommended that a new bat-
tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink
training and accurate transaxle of
the radio-frequency signal.
• Some vehicles may require the
ENGINE START/STOP button to
be
placed
"Accessories") position for pro-
gramming and/or operation of
HomeLink
• In the event that there are still pro-
Using
a
gramming difficulties or questions
after following the programming
steps
HomeLink
www.youtube.com/HomeLinkGent
ex or by calling 1-800-355-3515.
®
®
for quicker
in
the
ACC
(or
®
.
listed
below,
contact
®
at: www.homelink.com,
Programming
1. Press and release (1), (2) or (3)
button.
• If the indicator (4) is turned ON in
Orange, go to Step 3 since it is a
new programming.
• If the indicator (4) is continuously
turned ON or flashes in Green
rapidly several times, go to Step 2
since it is a programmed button.
OYG040643N
Advertisement
Chapters
Table of Contents
