dallmeier Panomera S4 Maintenance

Panomera® Maintenance
Important information for inspection and maintenance of Panomera® S4 and S8 systems
Like any other item of daily use, the components of a video security system are subject to natural wear and tear due to environmental
influences. Regular inspection and maintenance of Panomera® systems is therefore required to ensure error-free operation and to avoid
consequential damage. We recommend carrying out the inspection and maintenance as prescribed at least once a year during the
entire operating period.
The operator or owner of a video security system has a legally anchored duty to maintain the safety of the equipment.
This obligation includes in particular the inspection and maintenance and Panomera® systems.
If damage results from neglect of this obligation, the system operator or owner is liable.
The maintenance interval always depends on the prevailing environmental conditions and the current
conditions (storm, hail, etc.). The maintenance interval has to be determined individually on the basis of a risk analysis.
The standards and guidelines to be observed by the operator or owner of a video security system must
always be defined individually.
Strength Test
The Panomera® System system and all attached parts must be checked for mechanical strength. This serves to prevent personal injury
and damage to property caused by falling parts.
The inspection must to be carried out at least once a year.
■
The inspection must be carried out by qualified personnel.
■
The inspection must be sufficiently and comprehensibly documented.
■
The inspection must include at least visible damage and wear, functionality, operational safety and legibility of markings.
■
Please note that the operator of a video system is liable for personal injury and property damage caused by falling parts.
This simplified example shows the wall mounting of a Panomera®. Check alternative mounting methods (ceiling or pole mounting) accordingly.
If necessary, observe other attached parts and check in particular:
2
1
❶ the mounting of the Panomera® on the bracket.
❷ the mounting of the bracket on the wall.
❸ the sealing of the front glass.
❹ the fastening of the earthing cable.
❺ the correct positioning of the connectors for power supply and network connection.
❻ the attachment of the safety cable to the Panomera® and to the anchor point.
Defective parts must be replaced immediately.
3
© 2021 Dallmeier electronic V1.0.0 2021-09-22 1/2
4
5
6