Start Program; Interrupt Program; Cancel Program; Switching Off The Appliance - Bosch SM Series Instructions Manual

Start program

on
to press.
▶
a The program has ended when
down the display shows "0:00".
Clues
s If you want to add crockery
while the appliance is already in
operation, do not use the tablet
tray as a handle for the upper
basket. This will allow you to come
into contact with the partially
dissolved tab.
s You can view the current program
change by canceling the program.
→ "Abort program",
Page 39
s To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
Pause program
Note If you open the appliance door
when the appliance has heated up, it
is best to leave the appliance door
ajar for a few minutes and then close
it. In this way you prevent an
overpressure occurring in the
appliance and the appliance door
from jumping open.
on to press.
1.
a The program is saved
and the device turns off.
on press to continue the
2.
program.
The operation in essence NL

Cancel program

To end a program prematurely or to
change a program that has started,
you must cancel the active program.
Approx. 3 seconds on
▶
to press.
a The program is aborted
and is closed after approx. 1 minute.
Switch off device
The instructions for safe use →
1.
Page 12 consider.
on to press.
2.
To prevent damage from escaping
3.
water, close the tap completely (not
applicable for appliances with
AquaStop).
Tip: If you press
is pressed, the current program is
interrupted. When you switch on the
appliance, the program continues
automatically.
39