Indications On The Display - Bosch SM Series Instructions Manual

Faults
There are detergent
residues in the detergent
dispenser or in the tablet
dispenser.
Abnormal foaming
present.
Display instructions
Faults
Indication of softening salt with- No softening-
fill is lit.
Indication of softening salt with- Water softening is off
filling does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill
indicator is not lit.
Display flashes.
Cause
The spray arms were
blocked by crockery,
causing the dishes
detergent could not be
rinsed away.
Dishwasher detergent dispenser laundry
damp when filling the
detergent.
There is hand
dishwashing liquid in the
rinse aid reservoir.
Rinse aid has been
spilled.
Used detergent or
cleaning product
produces too much foam.
Cause
salt.
Sensor does not recognize
softening salt tablets.
switched.
Rinse aid is missing.
Water softening is
switched off.
Appliance door is not
completely closed.
Troubleshooting NL
Solution
Make sure the spray arms are not
▶
locked and free to rotate.
Only put the detergent in
▶
a dry detergent dispenser.
Fill rinse aid directly into the
▶
reservoir.
→ "Fill rinse aid",
Page 31
Remove the rinse aid with
▶
a cloth.
Use a different brand of dishwasher
▶
resourse.
Solution
Fill softening salt → Page 29
▶
Bee.
Do not use softening salt
▶
bleed.
Set water softening
▶
→ Page 29
Fill the rinse aid
1.
→
Page 31 Bee.
Set the amount of rinse aid.
2.
→ " Amount of rinse aid
▶
set", page 32
Close the appliance door.
▶
s
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
53