Drinking Water Connection; Electrical Connection - Bosch SM Series Instructions Manual

NL Set up and connect

Drinking water connection

Connect the device to a drinking
water connection.
Install drinking water connection
Note When you replace the
appliance, you must use a new
water inlet hose.
The necessary steps can be found in
1.
the supplied installation manual.
Connect the device to the
2.
drinking water connection using
the enclosed parts.
The technical data
→ Page 59 consider.
Make sure that the drinking water
3.
connection is not kinked, crushed
or entangled.

Electrical connection

Connect the device to the mains.
Connecting the appliance
electrically Notes
s Take the safety precautions
→ Page 5 heed.
s Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
s Please note that the
The protection system only works
when the device is supplied with
power.
Connect the appliance plug of the
1.
connecting cable to the appliance.
Plug the appliance into a socket in
2.
the vicinity of the appliance.
The connection data of the device
can be found on the type plate.
Check the plug for tightness.
3.
16