Table of Contents
Advertisement
1 4 basic
service
14.1 Switch on the device
press.
▶
The Eco 50° program is preset.
The Eco 50° program is a
particularly environmentally friendly
program and is ideal for normally
soiled dishes. It is the most efficient
program in terms of energy
consumption and water
consumption for this type of
tableware and demonstrates
compliance with the EU Ecodesign
Regulation. If you do not operate
the device for 10 minutes, the
device switches off automatically.
14.2 Set program
To adapt the washing cycle to how
dirty the dishes are, set a suitable
program.
Press the appropriate program
▶
button.
aThe program is set and
the program button flashes. aThe
remaining program duration
appears on the display.
14.3 Setting additional
functions
To complement the selected washing
program, you can set additional
functions.
A notice:The additional functions that
can be activated depend on the
program selected.
Press the button for the
▶
appropriate additional function.
→
"Additional functions", page 22
aThe additional function is set
and the additional function button flashes.
14.4 Setting the time delay
You can postpone the start of the
program up to 24 hours.
press.
1.
a"h:01" appears in the display.
Use to set the desired
2.
program start.
press.
3.
aThe time delay is activated.
Tip:You can deactivate the time delay
by pressing until "h:00" appears in
the display.
14.5 Start program
press.
▶
aThe program is finished when
the display shows "0h:00m".
Hints
¡If you during operation
If you want to add more dishes, do
not use the tab drip tray as a handle
for the upper dish rack. You might
come into contact with the partially
dissolved tab.
¡You can view the current program
Only change the program if you
cancel the program.
→ "Cancel program", page
36
¡To save energy, switch
The device switches off 1 minute after
the end of the program. If you open the
device door immediately after the end
of the program, the device switches off
after 4 seconds.
servicede
35
Advertisement
Table of Contents
