NL Troubleshooting
Faults
There are wipeable or
water-soluble deposits
in the interior or on the
door of the appliance.
There is white, hard-to-
remove deposits on the
dishes or on the interior
or door of the appliance.
Tea or lipstick residue
on the dishes.
50
Cause
The softening salt
reservoir is not closed.
Components of the
detergent are
deposited. This deposit
usually cannot be
removed chemically.
Water hardness is set
incorrectly or water hardness
is higher than 50 °dH
(8.9 mmol/l).
3in1 detergent,
biodetergent or eco-
detergent is
insufficiently effective.
Detergent is dosed
too low.
Washing program too weak
chosen.
Washing temperature is too low.
Dishwasher detergent has been
dosed too low or is unsuitable.
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
Solution
Turn the softening salt container
▶
closed.
Change detergent
▶
→
Page 32.
Clean the device mechanically.
▶
Set the water softening
▶
→
Page 28 on the water hard-
or add softening salt.
Set the water softening
▶
→
Page 28 on the water hard-
Use separate agents
(quality cleaning agent,
softening salt, rinse aid).
Increase the dose of the dishwashing
▶
detergent or change
detergent → Page 32.
Select a more powerful rinse program
▶
mom.
Adjust the sensitivity of the sensor
▶
system on.
Select a program with a high
▶
re wash temperature.
Use a suitable dishwasher detergent
▶
del → Page 32 and dose it
according to the manufacturer's
instructions.
Only remove coarse food residues
▶
and do not pre-rinse the dishes.
Adjust the sensitivity of the sensor
▶
system on.