Table of Contents
Advertisement
iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
4.4.2.5
Flexible Buttons - PGM 115/129
Selecting Flex Buttons will display the Flex buttons data input page. Enter a valid Station range and
click[Load] to enter Flex button data.For convenience, the copy, paste, and drag is available to enter or
modify data. Please click [Save] button after entering or modifying data to apply.
You can set the initial system default value if there is no assignment in Flexible Button Default Table (239) and
Preset Flexible Button Default (240) by clicking [Default Value].Otherwise, you can set the flexible button
value according to Flexible Button Default Table (239) and Preset Flexible Button Default (240) by clicking
[Default Value].
Each Flex button for each iPECS IP and LDP Phone and DSS Console can be assigned a function (TYPE) as
below. After selecting the Type for a button, enter the value, if required. The types available from the drop-
down menu are shown are shown in Table below. In addition, for the LIP Phone models 8040, 8050, 9070,
9071 and the LSS Console models, a label can be assigned that is used as the designation for the button in
the LCD of the phone.
TYPE
N/A
Empty (unassigned), may be defined by the user.
CO Line
Assigns button to access a defined CO/IP line.
CO Group
Assigns button to access a free line in the CO/IP Group.
Loop
Assigns button to access a loop line.
Station Number
Assigns button as DSS/BLF for the assigned station number.
Programming
Assigns button to dial a code from the Flexible Numbering Plan, see Appendix section.
(Numbering Plan)
Programming
Assigns button to perform a User Program function from the Fixed Numbering Plan,
(PGM)
Appendix section.
Station Speed
Station Speed Dial bin.
System Speed
System Speed Dial bin.
Net Station
Refer to Network Numbering Plan Table - PGM 324.
U-Loop
U-Loop button for call wait of internal & external call
The user can assign the desired number on Flexible button by selecting 'Dial Digit' in the
Dial Digit
field of Type. The user can make a call by pressing the assigned flexible button.
Figure 4.4.2.5-1 Flex Buttons Assignment
Table 4.4.2.5-1 FLEX BUTTON TYPE & VALUE
283
REMARK
Issue 2.3
Hide quick links:
Advertisement
Table of Contents
