Co/Ip Ring Assignment - Pgm 144 - LG-Ericsson iPECS eMG80 Programming Manual

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
CO/IP Ring Assignment – PGM 144
3.3.5.3
Each CO/IP line is assigned to signal a station or group for an incoming call (Ring). Separate ring assignments
are made for Day, Night, and Timed Ring modes.
When assigned to ring to a VSF announcement, the call can be dropped automatically after the assigned
announcement by entering '#' after the VSF announcement number.
When CO Lines are programmed to Ring an external AA/VM or Feature Server Group as an Automated
Attendant, the Ring signal can be on an immediate or delayed basis allowing other stations/groups to be
assigned Ring and answer prior to signaling the AA.
The delay is defined in seconds from 00 to 30.
PROCEDURE
CO RING ASSIGNMENT
ENTER COL RANGE
01-02 PRESS KEY
DAY NIGHT TIMED-R
Press the [PGM] button and dial 144.
Use the dial-pad to enter a CO Line range. For a single CO Line, enter the
same number twice.
Press the desired Flex button:
- Button 1: Day Ring
- Button 2: Night Ring
- Button 3: Timed Ring
Use the dial pad to select the destination type:
- Dial 1: Station
- Dial 2: Hunt Group
- Dial 3: VSF
- Dial 4: AA Ring Time
- Dial 5: Net number
Use the dial pad to enter a value for the selected destination type. For:
- Dial 1: Enter a station range (enter the same station number twice to
assign a single station) and the ring delay if any, in ring cycles (0~9).
- Dial 2: Enter a hunt group number.
- Dial 3: Enter the VSF announcement number and, if desired '#' to drop the
call after the announcement.
- Dial 4: For AA Ring Time, enter the desired delay from 00 to 30 seconds.
Press the [Save] button to store the data entry.
86
Issue 2.3