Networking Data -Pgm 320 To 324; Network Basic Attribute - Pgm 320 - LG-Ericsson iPECS eMG80 Programming Manual

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
3.3.10 NETWORKING DATA –PGM 320 to 324
3.3.10.1 Network Basic Attribute – PGM 320
PROCEDURE:
NET BASIC ATTRIBUTE
PRESS FLEX KEY (1-8)
BTN ATTRIBUTE/DISPLAY
NET ENABLE
1
(1:ON/:OFF) :OFF
NET RETRY COUNT
2
(00-99) :00
NET CNIP ENABLE
3
(1:ON/:OFF) :ON
NET CONP ENABLE
4
(1:ON/:OFF) :OFF
NET SIGNAL METHOD
5
(1:FAC/:UUS) :FAC
NET CAS ENABLE
6
(1:ON/:OFF) :OFF
NET VPN ENABLE
7
(1:ON/:OFF) :OFF
NET CC RETAIN MODE
8
(1:ON/:OFF) :OFF
Press the [PGM] button and dial 320.
Press the Flex button 1~8 for the desired setting, refer to Table 3.3.10.1-1.
Use the dial-pad to enter the required data.
Press the [Save] button to store the new data.
Table 3.3.10.1-1 NETWORK BASIC ATTRIBUTE (PGM 320)
Enable Networking function
Not used.
The name of calling station is sent to the
called system between iPECS eMG. CNIP
is displayed at called party stations
display based on the programming.
Reserved for future usage.
Select the information element type for
QSIG supplementary service message.
Not used.
Not used.
Not used.
DESCRIPTION
199
Issue 2.3
RANGE DEFAULT
0: OFF
OFF
1: ON
00-99 00
0: OFF
ON
1: ON
0: OFF
OFF
1: ON
0: UUS
FAC
1: FAC
0: OFF
OFF
1: ON
0: OFF
OFF
1: ON
0: OFF
OFF
1: ON