Data Entry Mode - LG-Ericsson iPECS eMG80 Programming Manual

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual

Data Entry Mode

3.2
Limited data entry can be accomplished from an Admin Station or station assigned for data entry (Station
Attributes III PGM 113, Flex button 1). After initialization and registration, any enabled iPECS IP or LDP Phone
may access the system database. In addition, as default, there is no Station Admin password defined. To enter
the Program mode from the Admin Station follow the procedure below. In the left column of the chart are the
LCD displays and in the right column are step-by-step instructions to modify database items.
PROCEDURE
STATION 100 (T)
04 SEP 01 02:49 PM
ENTER ADMIN PASSWORD
ADMIN PROGRAM START
ENTER PGM NUMBER
Press the [PGM] button and Dial '*' and '#'.
Enter the Admin password. Confirmation tone is received. As a
default there is no password and this step is skipped.
To select a program, use the instructions in the following sections,
starting with "Press the [PGM] button" and dial the specified Admin
Program code.
16
Issue 2.3