Local Network - D-Link Go-RT-N300 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address: Enter the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Apply Changes,
you will need to enter the new IP address in your browser to
get back into the configuration utility.
Subnet Mask: Enter a Subnet Mask. The default is 255.255.255.0.
Apply Changes: Click to save your settings.
D-Link GO-RT-N300 User Manual

Local Network

16