Figure 6-2 Cabinet Kick Plate Assembly Removal; Figure 6-3 Installed Ramps On Pallet Deck - Sun Microsystems Fire 15K Hardware Installation Manual

2. Prepare the cabinet for roll-up onto the shipping pallet deck.
a. Remove the kick plate assembly from both ends of the cabinet before loading,
(
FIGURE 6-2
pin, and pull the kick plate and mounting tube outward from the mounting
bracket and set aside until the cabinet has been secured in place on the
shipping pallet deck.
FIGURE 6-2
b. Align the cabinet wheels at the leading edge of the two ramps (
FIGURE 6-3
6-4 Sun Fire 15K/12K Systems Hardware Installation and De-Installation Guide • June 2003
). Use a pull-turn motion to release the spring-loaded captive locking
Kick plate
Spring-loaded
captive locking mounting
bracket
pin
Kick plate
mounting tube
Kick plate
Cabinet Kick Plate Assembly Removal
Cabinet (with doors and kick plates removed)
Installed Ramps on Pallet Deck
).
FIGURE 6-3
Shipping pallet
and ramps