Download
Share
Print this page
Life Fitness CLUB Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Life Fitness Manuals
  4. Fitness Equipment
  5. Club Machine
  6. Assembly instructions manual
Life Fitness CLUB Assembly Instructions Manual

Life Fitness CLUB Assembly Instructions Manual

Hide thumbs Also See for CLUB:

Advertisement

Quick Links

Download this manual
CLUB SERIES POWER RACK
ASSEMBLY INSTRUCTIONS
Part # 72xxxx
1
Revision:4/18/02
Rev A.

Advertisement

loading

Related Manuals for Life Fitness CLUB

Summary of Contents for Life Fitness CLUB

  • Page 1 CLUB SERIES POWER RACK ASSEMBLY INSTRUCTIONS Part # 72xxxx Revision:4/18/02 Rev A.
  • Page 2 PARTS LIST PART # DESCRIPTION PART # DESCRIPTION 72545 SIDE 3102922 3/8 X 2-3/4” BOLT 72550 TOP CROSS SUPPORT 3102905 3/8 X 3-3/4” BOLT 72553 RIGHT RAIL 3102906 3/8 X 4” BOLT 72555 LEFT RAIL 3102807 3/8” LOW HEIGHT LOCK NUT 72560 CHIN UP-SUPPORT 3102514...
  • Page 3 10 3/8 X 2-3/4” BOLT 3/8” LOW HEIGHT LOCK 11 3/8 X 3-3/4” BOLT 12 3/8 X 4” BOLT 3/8” SAE WASHER RH CAP WASHER (BLACK/WHITE/PLATINUM)
  • Page 4 FIGURE 1 11 3/8 X 3-3/4” STEP 1: • LOOSELY assemble the two SIDES (1) to the TOP CROSS SUPPORT (2) and the CHIN-UP SUPPORT (5) using fourteen RH CAPS (17), eight 3/8 X 3-3/4” BOLTS (11), fourteen 3/8” SAE WASHERS (14), fourteen 3/8” RH WASHERS (15) and six 3/8” LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 1.
  • Page 5 11 3/8 X 3-3/4” FIGURE 2 STEP 2: • LOOSELY assemble the two REAR UPRIGHTS (7) tot the SIDES (1) using sixteen RH CAPS (17), eight 3/8 X 3-3/4” BOLTS (11), eight 3/8” SAE WASHERS (14), sixteen 3/8” RH WASHERS (15) and eight 3/8” LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 2.
  • Page 6 FIGURE 3 3/8 X 4” 12 STEP 3: • LOOSELY assemble the BOTTOM CROSS SUPPORT (6) to the REAR UPRIGHTS (7) and two WEIGHT HORNS (7) using four BLACK RH CAPS(16), four RH CAPS (17), four 3/8 X 4” BOLTS (12), eight 3/8” SAE WASHERS (14), eight 3/8” RH WASH- ERS (15) and four 3/8”...
  • Page 7 FIGURE 4 TIGHTEN! TIGHTEN! TIGHTEN! TIGHTEN! STEP 4: • Securely tighten all loose frame connections made to this point, then proceed to snap RH CAPS (16 & 17) over the RH WASHERS (25) on all tightened connections...
  • Page 8 FIGURE 5 3/8 X 3-3/4” 11 STEP 5: • SECURELY assemble the WEIGHT HORNS (7) to the REAR UPRIGHTS (7) using sixteen BLACK RH CAPS(16), sixteen RH CAPS (17), eight 3/8 X 3-3/4” BOLTS (11), sixteen 3/8” SAE WASHERS (14), sixteen 3/8” RH WASHERS (15) and eight 3/8” LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 5.
  • Page 9 FIGURE 6 3/8 X 3-3/4” 11 STEP 6: • SECURELY assemble the two SMART RACKS (9) to the SIDES (1) using six BLACK RH CAPS (16), six RH CAPS (17), six 3/ 8 X 3-3/4” BOLTS (11), twelve 3/8” SAE WASHERS (14), twelve 3/8” RH WASHERS (15) and six 3/8” LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 6.
  • Page 10 FIGURE 7 STEP 7: • CAREFULLY slide the RIGHT and LEFT RAIL (3 & 4) into the SIDES as shown in FIGURE 7.

  • Page 11: Warranty Information

    • Lube the Guide Rods. Apply the lubricant to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. Do not spray lubricant directly on the Guide Rods. Thank you for purchasing the LifeFitness CLUB SERIES POWER RACK. If unsure of proper use of equipment, call your local LifeFitness distributor or call the LifeFitness customer service department at...