Workrite Ergonomics CONF-BSE-WP-S Assembly/Installation Instructions

Assembly & Installation Instructions:
Conform Base, Wall Plate
CONF-BSE-WP-S

Parts Included

A
Wall Plate Assembly
Qty: 1

Required Parts Sold Separately

Conform Monitor Arm
Do not exceed 48 lb.
Mounting Surface requirement. Do not mount to drywall only!
1

Attach the Wall Plate Base to the wall

a
Remove Bolt & Washers.
b
Fasten Wall Plate Base with ¼/6 mm diameter bolts or screws
appropriate to the construction of the wall.
a
1 of 2
All manuals and user guides at all-guides.com
Parts Included, Hardware kit
B
5 mm Allen Wrench
Qty: 1
C
4 mm Allen Wrench
Qty: 1
D
2.5 mm Allen Wrench
Qty: 1

Tools Required

• Drywall: 5⁄ 8 " sheetrock with screws
into stud backing, using 2 centered
holes.
• Use ¼"/6 mm diameter fasteners.
b
(drywall/stud mount)
Phillips head screwdriver, 2.5 mm Allen Wrench, 5 mm
Allen Wrench, Drill, Drill Bit, Fasteners (not included).
• Concrete: Use appropriate concrete anchors using
4 outer holes.
• Wood/steel/other solid surface: bolt or screw using
4 outer holes.
• Use ¼"/6 mm diameter fasteners.
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
E
Static Arm Spacer
Qty: 1
F
Sticker
Qty: 1
b
(all other surfaces)