Identification - Grizzly T20798 Owner's Manual

a
J
a. clamping Pressure knobs: adjusts pres-
sure on the workpiece, allowing for different
thicknesses.
B. clamping Leaf: holds the fingers. squeezes
the workpiece against the clamping block.
c. finger Blocks: adjustable dies that the
workpiece is bent against.
D. Stop Dial: used to lock bending angle.
E. Bending Leaf: swivels up to bend the
workpiece.
t20798 40" pan and Box Brake

identification

B
figure 1. Common pan and Box Brake components.
C
i
h
f. Setback knobs: adjusts to the gauge of the
workpiece and desired bend radius.
g. foot Pedal: raises and lowers fingers onto
clamping block.
h. foot Pedal Lock: locks foot pedal.
i. Operating handle: used to raise and lower
the bending leaf.
J. clamping Block: Fixed block (or lower jaw)
that the clamping leaf presses against.
d
E
F
g
3