Table of Contents
Advertisement
1.
Bending Leaf—Swivels up to bend the workpiece.
2.
Clamping Leaf—Holds the fingers. Squeezes the workpiece against the clamping block.
3.
Operating Handle—Used to raise and lower the bending leaf.
4.
Finger Blocks—Adjustable dies that the workpiece is bent against.
5.
Clamping Block—Fixed block (or lower jaw) that the clamping leaf presses against.
6.
Setback Knobs—Adjusts to the gauge of the workpiece and desired bend radius.
7.
Clamping Pressure Adjusting Nuts—Adjusts pressure on the workpiece, allowing for different
gauges.
8.
Foot Pedal—Raises and lowers fingers onto clamping block.
9.
Foot Pedal Lock—Locks foot pedal.
10. Stop Collar—Used to lock bending angle.
4
Figure 1. Common Pan and Box Brake components.
G0578 40" Pan and Box Brake
Advertisement
Table of Contents
