Table of Contents
Advertisement
Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
A
P
O
N
A. Outfeed Table
B. Fence
C. Cutterhead Guard
D. OFF Button
E. POWER Light
F.
ON Button
G. Infeed Table
H. Fence Tilt Handle
For Your Own Safety Read Instruction Manual Before Operating Jointer
a) Wear eye protection.
b) Always keep cutterhead and drive guards in place and in proper operating condition. ALWAYS
replace cutterhead guard after rabbeting operations.
c) Never make jointing or rabbeting cuts deeper than
d) Always use hold-down or push blocks when jointing material narrower than 3" or surface
planing material thinner than 3".
e) Never perform jointing, planing, or rabbeting cuts on pieces shorter than 8" in length.
Model G0526A40 (Mfd. Since 12/22)
Identification
E
D
B
C
F
G
K
L
M
(Column Removed For Clarity)
I.
Fence Lock
J.
Fence Tilt Lock
K. Infeed Table Handwheel
L.
Depth Scale
M. Infeed Table Lock Handle
N. Dust Port
O. Outfeed Table Lock Handle
P. Outfeed Table Handwheel
⁄
" or planing cuts deeper than
1
8
H
I
J
⁄
".
1
16
-3-
Advertisement
Table of Contents
