Page 2
The 18G Extender Set Control Path has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the JTECH-EX230 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 3
TABLE OF CONTENTS INTRODUCTION ....................... 1 PACKAGE LIST ......................1 FEATURES ........................ 1 PANEL DESCRIPTION ....................2 PANEL DESCRIPTION ....................3 SYSTEM CONNECTION ................... 3 SPECIFICATION ....................... 4...
Page 4
INTRODUCTION The JTECH-EX230 is a cost-effective point-to-point extender set for HDMI 2.0 and IR signals; this kit supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18 Gbps, HDCP 2.2 compliant; It provides HDMI transmission up to 230 feet (70 meters) for 4K@60Hz 4:4: 4 or 1080p, over single CAT5e/6 cable.
Page 5
PANEL DESCRIPTION Transmitter Panel Description CATx OUT IR IN IR OUT DISPLAY SOURCE DC 12V EDID BYPASS EDID COPY Tx/3s ① CATx OUT: RJ45 port to connect the CATx IN port of receiver by CATx cable. It supports 12V PoC to power the receiver. The orange LED illuminates when there is a valid HDMI signal input.
Page 6
PANEL DESCRIPTION Receiver Panel Description ① DISPLAY: Type-A female HDMI port to connect HDMI display device. ② CATx IN: RJ45 port to connect the CATx OUT port of transmitter by CATx cable. It supports 12V PoC and the receiver can be powered from the transmitter.
Page 7
SPECIFICATION Transmitter Input (1) SOURCE Input Connector (1) 19-pin type-A female HDMI Output (1) DISPLAY, (1) CATx OUT Output Connector (1) 19-pin type-A female HDMI, (1) RJ45 Control (1) IR IN, (1) IR OUT Control Connector (2) 3.5mm mini jacks Receiver Input (1) CATx IN...
Page 8
Specifications, pictures & software described herein are subject to change without prior notification. Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect. All trademarks are the sole property of their respective companies.
Need help?
Do you have a question about the JTECH-EX230 and is the answer not in the manual?
Questions and answers