Environmental Specifications - FATEK FBS Series Manual

Hardware High Speed
Counter
(HHSC) /32Points
Software High Speed
Counter
(SHSC) /32Points
Port0 (RS232 or USB)
Port1～Port4
(RS232, RS485 or Ethernet)
Maximum Connections
Number of Axes
NC
Output Frequency
Positioning
Output
Output Pulse Mode
(PSO)
Positioning Language
Number of Points
HSPWM
Output
Output Frequency
Captured input
Captured pulse
Setting of Digital Filter

1.6 Environmental Specifications

Item
Operating Ambient
Temperature
Storage Temperature
Relative Humidity (non-condensing, RH-2)
Pollution Level
Corrosion Resistance
Altitude
Fixated by DIN RAIL
Vibration
Secured by screws
Shock
Noise Suppression
Withstand Voltage
The listed environmental specifications are for FB
not conform to above conditions should be consulted with FATEK.
Channels Up to 4
Counting 8 (U/D, U/D×2, K/R K/R×2, A/B, A/B×2, A/B×3
mode A/B×4)
Counting Up to 100KHz (single-end input) or 920KHz
frequency (differential input)
Channels Up to 4
Counting
3 (U/D、K/R、A/B)
mode
Counting
Maximum sum up to 10KHz
frequency
Communication Speed 4.8Kbps～921.6Kbps
(9.6Kbps)*
Communication Speed 4.8Kbps～921.6Kbps
(9.6Kbps)*
254
Up to 4
920KHz single output (single or A/B way)
920KHz(single way) and 460KHz(A/B way)
differential output.
3 (U/D、K/R、A/B)
Special Positioning Programming Language
Up to 4
72Hz～18.432KHz (with 0.1﹪resolution)
720Hz～184.32KHz ( with 1﹪resolution)
Max.36 points (all of main units have the feature)
Points
> 10μS(super high speed/high speed input)
> 47μS(medium speed input)
width
> 470μS(mid/low speed input)
Frequency 14KHz ~ 1.8MHz
X0～X15
Tine constant 0 ~ 1.5mS/0 ~ 15mS,adjustable by step
of 0.1mS/1mS
X16～X35 Time constant 1mS~15mS,adjustable by step of 1mS
Minimum
Enclosure
equipment
Maximum
Minimum
Open
equipment
Maximum
Specification
5°C
40°C
5°C
55°C
-25°C～+70°C
5%～95%
Degree II
By IEC-68 Standard
2000m
≦
0.5G, for 2 hours each along the 3 axes
2G, for 2 hours each along the 3 axes
10G, 3 times each along the 3 axes
1500Vp-p, width 1us
1500VAC, 1 minute

Warning
-PLC under normal operation. Any operation in environment
S
H1 -8
Total number of HHSC and SHSC is
8.
HHSC can change into High Speed
Timer with 32 bits/0.1mS Time base.
Port1～4 talk FATEK or Modbus RTU
Master/Slave Communication Protocol
Chosen by frequency at high frequencies
Chosen by time constant at low frequencies
Note
Permanent Installation
L, N to any terminal