The Handy THS80 Operator's Manual And Parts List page 8

P 5: (1) Insert the Steel Wire head of control cable into the small hole on Gauge and Lever
Assembly. (2)Release two bolts M5x1 0 and nuts on Press Plate. (3) Put the Plastic Tube into the
slot of Press Plate. (4). Tighten two bolts M5x10 and nuts again.
Insert the .Stce:1 \jviro head of
Control Cable into the: small hole) on
C3augo and Lover ;\ssombly.
Put th laslic
TUfX: into the slot
P!(J10.
In
se Pin