First Time Use - Viavi AVX-10K Getting Started Manual

3.

First Time Use

Caution: Please read this section in its entirety before powering on the device.
Turn the Test Set ON
1. Press and release the Power Button.
•
An initializing indicator screen is displayed during the boot-up process. Wait while the
device completes the boot-up process.
•
Battery LED indicator is illuminated, and the UI loads the Home screen in the display when
the device is ready for use.
•
Chime may occur (optional setting).
Run Self-Test
1. Remove the protective film from the touchscreen display before use.
2. Ensure that the Test Set is ON.
3. Verify Test Set Operation
a. On the Home screen, open the Self-Test ribbon.
b. Select the Self-Test application.
c. Press the RUN soft key and follow the prompts as directed. A cable will be
d. When Self-Test has completed running all tests, verify that all portions of the
Rev. 001
22135253
needed for External Loopback test. This cable is supplied with each AVX-10K.
test have passed. If any portion of Self-Test fails, please contact VIAVI Customer
Service.
VIAVI CONFIDENTIAL
AVX-10K Getting Started
2021-10-12
Page 8 of 14