Yolink Control - Yolink YS4909-UC Manual

F. About YoLink Control
YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connec on. (Use of YoLink Control is
op onal; you can use the Automa on feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Water
Leak Sensor, while examples of a responder are a Siren or a Gas/Water Valve (Controller)
The Water/Gas Valve Controller can only work as the responder of YoLink Control and can only set
up YoLink Control with YS7903-UC Water Leak Sensor and YS7904-UC Water Leak Sensor 2
F-1. Pairing
To co nfi g u re yo u r Wate r L e a k
1
Sensor as a controller, Press and
h o l d t h e S E T b u o n fo r 5 - 1 0
s e co n d s u n l t h e L E D q u i c k l y
blinks green, then, release the
bu on
Refer to the Water Leak Sensor
manual for more informa on:
YS7903-UC
Water Leak
Sensor
a. SET Bu on
(5-10 seconds) 35