Radio Inhibit And Uninhibit - Tait TM9456 User Manual

Radio inhibit and uninhibit

Sending a radio inhibit request
82 P25 services
3 Press Send to.
Radio monitor
Car 2
Car 3
Cancel
The red LED glows and a message appears in the
display.
Sending
R.U.M to
Car 2
Cancel
If the other radio has received your request, it will
now call you, so that you can monitor activity near
the radio.
Call received
Car 2
This feature is only available for digital channels
operating in conventional mode, and for radios
configured for dispatcher operation.
If you want to make another radio on the system
inoperable, you can use the radio inhibit feature. This
feature is also known as 'stun'.
To the user of the inhibited radio, it appears as though
the radio has turned off. The radio remains inoperable
even if it is turned off and then on again.
The radio cannot return to operation until it receives
an uninhibit request. This is also known as 'revive'.
1 Press Menu and select Services > Radio inhibit.
Send to
Menu