Dynamic Regrouping - Tait TM9456 User Manual

Dynamic regrouping

74 Operating in P25 trunking mode
When the trunking system returns to normal
operation, your radio is notified, and will attempt to
register on the control channel it was previously using.
The dynamic regrouping feature allows you to send a
dynamic regrouping request to your dispatcher. Your
dispatcher can then reassign your radio to a special
communications group.
Caution While you are operating on this group,
normal channel selection may be disabled.
To send a dynamic regrouping request:
Press Menu and select Trunking >
■
Dyn Regrouping.
When you press Select, a message appears in
the display.
Sending
dynamic
regroup rqst
Cancel
If the request is successful, an acknowledgement
message is displayed.
Ack received
OK