Uwatec REBEL BC Manual page 16

OP Valve with a Pull
Dump: Cord is
cracked or removed
BC has cuts, punc-
tures, frayed seams,
excessive abra-
sion, loose/missing
hardware and other
damage of any kind.
Tightening of the
dump valves and
the elbow ring are
not sufficient
Leakage from aircell"
after oral inflation
Super Chinch band
doesn't work
BC doesn't fit comfort-
able
Weight pockets are
slipping out
16
Buoyancy cannot
Improper
use, transport be guaranteed
or storage. during the dive
Wearing
Potential rapid
down of com-
ponents
ascension
Improper Not possible to
use, transport
use. No guaran-
or storage.
tee for a safe dive
Wearing
down of com-
ponents
Improper as- Potential to lose
sembly or parts during the
l o o s e n e d dive
during trans-
port
Cuts or Not possible to
cracks use. Potential
because of rapid descension
improper
using, trans-
portation or
storage
Tankband Tank slip out. Not
has not the possible to dive.
correct size
adjustment,
Not correct
assembled
Adjust straps
Possible restric-
and other
tions of breathing
attachments
or possible los-
on the BC are
ing parts during
not attached
the dive
correct
Buckles or No downforce
zipper are possible without
not working lead
or broken
because of
improper
using, trans-
portation or
storage
Don't start diving.
Have the BC check
by an authorized
Scubapro technician.
Don't start diving.
Have the BC check
by an authorized
Scubapro technician.
Don't start diving.
Have the BC check
by an authorized
Scubapro technician.
Don't start diving.
Have the BC check
by an authorized
Scubapro technician.
Don't start diving.
Check the correct
tank size and change
it if needed. Note:
Check before the
maximum Volume of
the BC!
Make sure all straps
and parts are on the
correct position,
before diving. Check
the correct size of
the BCD.
Check buckles and
zipper of weight
pockets if there
are any damages.
If not possible to
fix, don't start div-
ing. An authorized
Scubapro technician
have to check weight
pockets.