Yale 8800 Series Installation Instructions Manual
Mortise lock used with sectional trim and v series indicators
Hide thumbs
Also See for 8800 Series:
- Hardware manual (36 pages) ,
- Parts & service manual (54 pages) ,
- Installation instructions manual (8 pages)
Table of Contents
Advertisement
Quick Links
Installation Instructions
8800 Series Mortise Lock
Used with Sectional Trim and V Series Indi
WARNING!
This product can expose you to
lead which is known to the state
of California to cause cancer and
birth defects or other reproductive
harm. For more information go to
www.P65warnings.ca.gov.
For technical support contact Yale
®
at 800.438.1951 x5033 or support@yalelocks.com
Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
cators
80 8800 0016 000 12/20
Advertisement
Table of Contents
Related Manuals for Yale 8800 Series
Summary of Contents for Yale 8800 Series
- Page 1 Installation Instructions 8800 Series Mortise Lock cators Used with Sectional Trim and V Series Indi WARNING! This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm.
-
Page 2: Table Of Contents
Wrench Driver For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part 80 8800 0016 000 12/20... -
Page 3: Indicator Variants
Figure 5 installation. Retaining Pad Figure 4 For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part 80 8800 0016 000 12/20... -
Page 4: Installation
NOTE: If retrofitting over an existing product, ensure door surface is free of chips and debris around holes so indicator will sit flat against door surface. For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part 80 8800 0016 000 12/20 without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. -
Page 5: Install Levers
#8 32 x 3/8" Screw NOTE: Torx security screws recommended. Figure 10 For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part 80 8800 0016 000 12/20 without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. -
Page 6: Install Cylinder
2. Tighten cylinder clamp screw with #2 Phillips screwdriver. • Check operation and adjust if necessary. Notes: • Yale logo must be horizontal and on top. (See Figure 12) • If double cylinder function is used, repeat steps 7.1 and 7.2 for second cylinder. •... -
Page 7: Indicator Part List
Sectional Indicator Template Kit (not shown) 50-8800-9343 *These parts are for 1-3/4" standard thickness doors. For other thicknesses, contact the factory. NOTE: Reference 8800 Series parts manual for all lock body parts. For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. - Page 8 Tel: 1 905 821 7775 Yale Commercial is a business associated with ASSA ABLOY Access and Egress Fax: 1 905 821 1429 Hardware Group, Inc., an ASSA ABLOY Group company. Copyright © 2020, assaabloyai.com...
Need help?
Do you have a question about the 8800 Series and is the answer not in the manual?
Questions and answers