Install Levers; Install Indicator Mounting Plate; Install Indicator Assembly - Yale 8800 Series Installation Instructions Manual

8800 Series
Mortise Lock
Installation Instructions
5 Installation, continued

Install Levers

4
1. Insert outside mounting plate through
door and lock body, and hold. (Figure 8)
2. Align and fasten inside mounting plate
securely with two (2) #8-32 x 1-1/4"
screws.
3. Install roses on inside and outside
adapter plates.
4. If included, press rose adapter into rose and
mounting plate assemblies.
5. Unscrew inside spindle 1/2 turn and align
ramp in the horizontal position.
6. Slide plastic bushing onto outside lever and
spindle and insert through the lockbody.
7. Slide plastic bushing onto inside lever and
attach to spindle. Then tighten inside lever
set screw.

Install Indicator Mounting Plate

5
1. Screw indicator mounting plate to door with four
(4) #6 x 3/8
2. If indicators are being used on both sides of door,
repeat step 5.1 for opposite side.

Install Indicator Assembly

6
1. Verify lock is in unlocked state (turn outside
lever to confirm).
2. Verify indicator is in vacant/unlocked position.
3. Assemble indicator assembly onto mounting
plate. (Figure 10)
4. Secure indicator assembly to door with two (2)
machine screws.
• Use #8 32 x 5/8" screw for top
• Use #8 32 x 3/8" screw for bottom
5. If indicators are being used on both sides of
door, repeat steps 6.1 through 6.3 for opposite
side.
NOTE: Torx security screws recommended.
For technical support contact Yale ® at 800.438.1951 x5033 or support@yalelocks.com
Copyright ©2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited
"
sheet metal screws. (Figure 9)
Inside of door
Rose
#8 32 x 1 1/4"
Screws
Inside MountingPlate
Outside Mounting Plate
Inside of door
Set Screw
Inside lever
Plastic Bushing
Rose Adapter
Plastic Bushing
Outside Lever and Spindle
5
RH door
shown
Outside
of door
Rose
Outside of door
Rose Adapter
Figure 8
Mounting
Plate
#6 x 3/8" Screws
Figure 9
Indicator
Assembly
#8 32 x 5/8"
Screw
#8 32 x 3/8"
Screw
Figure 10
80 8800 0016 000 12/20