Display Block - A&D Omniace III RA2300A Instruction Manual

2.2.Display Block

The RA2300A has TFT color LCD with touch panel. This LCD displays screen for setup and user
can make settings by touching the setting items that is displayed on the LCD.
Turn on the recorder that has the factory default settings. The following screen appears. The contents
for amplifiers differ depending on the amplifiers that are installed.
The buttons on the operation panel switches the screen display; the touch panel buttons on a displayed
panel makes settings for input units, recording conditions, acquisition, and triggers. The conditions of
the signals that are input can be observed on the display.
There may be few dots that always illuminate or do not illuminate on the display or slight
NOTE
brightness unevenness on the display. These phenomena are not defects.
RA2300A (7001754-R01)
[Input Monitor] screen
2-3
2. Name and Function of Each Block