Specifications By Each Measurement Mode; Memory Recorder Mode - A&D Omniace III RA2300A Instruction Manual

20.3.Specifications by each measurement mode

20.3.1. Memory Recorder mode

Use this mode to acquire measuring data of input signals to the main body's memory This mode is
mainly used for measuring high-speed phenomenon based on the trigger After the recording, the
data can be displayed on a playback monitor and be copied.
(1) Memory Acquisition
recording speed
Time Axis
Memory Space
Block division
Acquisition
Operation
Copy Range
(2) Auto Copy Printing
After recording of memory data into a main unit, the data is copied or output to a file.
(ON/OFF is available)
Copy Range
Where to output
Data Format for
File Output
Acquisition Drive
RA2300A Recorder (7001754-R01)
Configure by the sampling speed (period).
1 to 999 s, 1 to 999 ms, and 1 to 100 s. can
1 to 999 s, 1 to 999 ms, and 1 to 100 s can be configured for user 1 and
user 2.
*Acquisition by external clock synchronization
(Remote Unit: due to the option of an external sample input)
0.01%
2 MW/CH
1 to 128 Block
Push the start key on the operation panel to start. (Staring with time trigger is
also available)
Once, Repeat, and Endless settings are available.
Acquisition
Method
Once
Repeat
Endless
*For endless, the existing data is overwritten.
Specified Range, Centering Trigger
Copy Range
Specified Range
Centering Trigger
Center Trigger to copy to a recording paper with 1% to 100% of data.
Output to a recording paper or a file.
Center Trigger to output to a file with 1% to 100% of data.
*CSV is a comma or tab delimited text format that can be used in
spreadsheet software.
*File extension FSD (binary), CSV (CSV)
Built-in HDD drive or External Drive (USB supported)
Acquisition Operation
Measurement is made once and is finished.
A measurement is repeated the same times as the
number of memory block and is finished.
A measurement is repeated until it is stopped.
Copy Operation
Within any cursors, copy between two points
Center Trigger to copy with 1% to 100% of data.
20-9
20. Specifications