Signal Settings - A&D Omniace III RA2300A Instruction Manual

14. Replay Display (Displaying Recording Data)

14.5. Signal Settings

It is possible to confirm the recording conditions for channel of the signal that are recorded as data and
change the setup for waveform display. Press the Signal Setting button on the upper part of the Replay
screen. The Setup Screen appears. The contents differ depending on the amp type.
Analog amp setup screen
・ Waveform ON/OFF setting
・ Zero position setting
・ Physical unit conversion setting
・ Other recording
display
Operations of Signal Setup screen is the same as those of the Amp screen. For more
TIPS
details, see 7. Amp Units
Event amp setup screen
Waveform ON/OFF setting
・
・ ON/OFF setting by signal
・ Event waveform adjustment
condition
・ Signal type display
Event amp setup screen
・
・ ON/OFF setting by signal
・ Event waveform adjustment
14-6
RA2300A Recorder (7001754-R01)
Waveform ON/OFF setting