Headlights - Triumph Trident Owner's Handbook Manual

MAINTENANCE
142

Headlights

Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the headlight beam is
adjusted to illuminate the road surface
sufficiently far ahead without blinding
oncoming traffic.
An incorrectly adjusted headlight may
impair visibility causing an accident.
Never attempt to adjust a headlight
beam when the motorcycle is in
motion.
Any attempt to adjust a headlight
beam when the motorcycle is in
motion may result in loss of control
and an accident.
Warning
Warning
Caution
Do not cover the headlight or lens
with any item likely to obstruct air
flow to, or prevent heat escaping from,
the headlight lens.
Covering the headlight lens during
operation with items
luggage, adhesive
intended to alter
headlight beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is not
considered a manufacturing defect
and will not be
warranty.
If the headlight must be covered
during use - such as taping of the
headlight lens
closed‑course conditions
headlight must be disconnected.
of clothing,
tape, devices
or adjust the
or non genuine
covered under
required during
- the