Powerx Operation; Turning Power On/Off; Power-Saving Sleep Mode - Ferno POWER X SN-POW1001 User Manual

POWERX Operation

5.1 - Turning Power On/Off

To turn the trolley power on, first ensure a battery is attached to
the battery holder, located at the base of the trolley at the foot-
end. Ensure the battery is fully charged by pressing the charge-
test button on the battery prior to attaching it to the trolley.
POWERX control box at foot-end
The main power On/Off button is located adjacent to the battery
on the control box. Depress the button once to turn on.
Trolley main power red on/off button, next to battery
LCD showing battery status & number of lifts
The LCD display back-light will illuminate and the display come
on and a red LED will also illuminate, confirming power is ON.
The LCD display shows the current number of lifts and the battery
charge status.
10
5 - POWERX OPERATION

5.2 - Power-Saving Sleep Mode

The trolley will go into sleep mode after 1 minute of 'non-activity'
on the controls. "SLEEP" will appear on the LCD when in sleep
mode. The red LED will remain lit, indicating power is still on.
LCD showing Sleep Mode
In sleep mode the amount of power drawn from the battery
is minimised, therefore saving battery charge. To awaken the
trolley from sleep mode, press any of the control buttons on the
foot-end of the trolley.
Press any button to awake from Sleep Mode
Trolley out of Sleep Mode
A fully charged 5Ah battery will last up to 66 hours if left in
sleep mode (30 hours for 3Ah battery).
However it is recommended to always switch the trolley off
whenever it is not being used for a period of time, to preserve
power and prevent accidental activation of the lift process.
To ensure maximum operation of the trolley from a single battery
charge, ensure that the battery is fully charged at the beginning
of each shift.
FERNO/MAN/0721/216-R22/UK