Start-Up
1) Add Water
Ø Remove grey cap and add tap
water to both tanks
Ø Each tank holds 1 gallon
2) Plug into Electrical Outlet
Ø The SteamHERO should be the
only appliance plugged into the
electrical outlet
Extension Cord:
Ø Use only a 12 gauge / 20AMP rated or
higher rated extension cord
Ø 25ft maximum length
3) Push the ON/OFF Button
It will take 10 minutes for the
SteamHERO to heat up and reach
working temperature
Quick Start
1) Connect the Hose
Ø Secure the SteamHero by
2) Insert the hose into the
connection port
Ø Push until you hear a "click"
3) Steam Control
Ø Unlock by pressing RED button
Ø Squeeze trigger
4) Adjust Steam Pressure
Ø Turn the knob on front of
SteamHero to increase / decrease
steam pressure
Steam Control
pushing down the front brake
locks; locking the wheels will
make it easier to push the hose
into the steamer
on hose handle
6