Table of Contents
Advertisement
Quick Start
1) Add Water
Ø Remove grey cap and fill both
reservoir tanks with tap water
Ø Each tank holds 1/2 gallon
2) Plug into Electrical Outlet
Ø The EAGLE PLUS™ should be
the only appliance plugged into
the electrical outlet
3) Power
ON
Master Power Switch
It will take 10 minutes to reach
working temperature
QUICK START
USE only a Heavy
Duty extension cord
Ø 10 or 12 Gauge
Ø 15 AMP / 125V
Ø 25-50 FT in length
ON/OFF
3) Connect the Hose
Ø Secure by pushing by locking
the front brakes
Ø locking the wheels will make
it easier to push the hose into
the steamer
4) Insert the hose
Ø Push until you hear a "click"
5) Steam Control
Ø Unlock by pressing RED
button on hose handle
Ø Squeeze trigger
6)
Adjust Steam Pressure
Ø ADJUST STEAM PRESSURE
PUSH
BUTTON
1 – Low
2 – Medium (Recommended)
3- High
2
4
Advertisement
Table of Contents
