Quick Start - US Steam SeaHawk User Manual

1) REMOVE TANK LID
Ø Lift both silver handles to remove.
2) ADD WATER
Steam Reservoir Tank
ØLift lid and add water (tap water is ok)
Vacuum Collection Tank:
ØAdd water to fill mark
ØReassemble into SeaHawk and add lid
Hot Water / Extraction Bottle
Ø Add water and insert.
Add essential oils to the water ONLY in
the vacuum collection tank.
3) ATTACH HOSE
Ø Insert the vacuum hose with the release button on top
4) PLUG INTO ELECTRICAL OUTLET
Ø The SeaHawk should be the only appliance plugged into the
power outlet.
Ø Use only a 12 gauge / 15AMP rated or higher extension cord.
Ø It will take 5 minutes for the SeaHawk to heat and be ready for
use.
5) ON/OFF
Once the boiler reaches working pressure, the
will go solid and the SeaHawk is ready to use.
If the Red "Low Water" light comes on and steamer starts
beeping:
Ø Turn off your SeaHawk and refill the water tank.
Ø Push power button to restart and resume heating.
Ø The
Orange
the boiler is heating.

Quick Start

light may blink during operation indicating
Orange light
ON/OFF
5