1) REMOVE TANK LID
Ø Lift both silver handles to remove lid
2) ADD WATER
1) Steam Reservoir Tank
Ø Lift lid and add water (tap water)
2) Vacuum Collection Tank:
Ø Add water to fill mark
Ø Reassemble into SeaHawk and lid
3) Extraction Bottle
Ø Add water and insert
3) ATTACH HOSE
Ø Insert the vacuum hose with the release button on top
4) PLUG INTO ELECTRICAL OUTLET
Ø The SeaHawk should be the only appliance plugged into the power
outlet
Ø Use only a 12 gauge / 15AMP rated or higher extension cord
Ø It will take 5 minutes for the SeaHawk to heat and be ready to use
5) ON/OFF – Push BOTH the Steam & Vacuum Button
Ø Once the boiler reaches working pressure, the
the SeaHawk is ready to use
Vacuum
Quick Start
Orange
Steam
light will go solid and
ON/OFF
5