Deactivating, Storage And Transport; Deactivating; Storage; Transport - Waltron 9065C Instruction Manual

Deactivating, Storage and Transport

8 DEACTIVATING, STORAGE AND TRANSPORT

DEACTIVATING

8.1
If the 9065C is no longer used, the components must be sent to an appropriate waste disposal
organization or the entire unit can be returned to Waltron. The materials from which the main
components are made are given below:
PCB housing
Top chamber
Measurement chamber unit
Battery unit

STORAGE

8.2
The instrument must be stored in a dry location and be protected against mechanical and/or
chemical damage. If the 9065C is not going to be used for a long time, the instrument must be
thoroughly rinsed with water to clean it. The instrument must then be emptied, flushed with air
and dried.
The 9065C must be completely empty (dry) when it is stored away.

TRANSPORT

8.3
When the 9065C is transported, the display and the Perspex components must be protected
against direct mechanical impact. We recommend saving the packaging materials provided by
Waltron and using them whenever the 9065C is transported.
The 9065C must be completely empty (dry) when it is transported.
37
Table 8.1: Main component materials.
metal plate, electronics and sensors, ABS
Perspex
Perspex, ABS, stainless steel
batteries (NiMH), Polyurethane, stainless steel plate
9065C Portable Luminescent Dissolved Oxygen Analyzer
Waltron User Manual