Table of Contents
Advertisement
Installation
6. Use the arrow buttons to select the "Unit" menu and then press "Enter" to open the menu.
7. The arrow buttons can be used to select the various submenus. Press "Enter" to select the
"O
" menu, the "Temp" menu or the main menu.
2
8. The arrow buttons can be used to select the following units:
a. Temperature:
b. O
9. Press "Enter" to return to the "Unit" menu.
TIME SETTINGS
3.5
Various process times can be set via the "Date/Time/Display" menu.
The "Date/Time/Display" menu is accessed as follows:
1. Press "Enter" until the Waltron logo is displayed.
2. Press "Enter" again.
3. The main menu will now be displayed.
4. Use the arrow buttons to select the "Configuration" menu and then press "Enter" to open
the menu.
5. Use the arrow buttons to select the "Date/Time/Display" menu and then press "Enter" to
open the menu.
5. The arrow buttons can be used to select the various submenus. Press "Enter" to open the
"Date" menu, the "Time" menu, the "Shutoff time" menu, the "Display contrast" menu,
the "Display times" menu or the main menu.
DATE
3.5.1
The arrow buttons can be used to alter the date. Press "Enter" to go from the day to the month and
then to the year. Press "Enter" again to return to the "Date/Time/Display" menu.
TIME
3.5.2
The arrow buttons can be used to alter the time. Press "Enter" to go from the hours to the minutes
and then to the seconds. Press "Enter" again to return to the "Date/Time/Display" menu.
SHUT-OFF TIME
3.5.3
The 9065C automatically turns itself off if no buttons have been pressed for a certain time.
This time can be adjusted using the arrow buttons. Press "Enter" to return to the
"Date/Time/Display" menu.
DISPLAY CONTRAST
3.5.4
The display contrast can be adjusted using the arrow buttons. Press "Enter" to return to the
"Date/Time/Display" menu.
17
°C, °F
:
Dissolved in liquid:
2
in gas:
ppb; ppm; mg/l; μg/l
%; %a.s. (for calibration purposes)
9065C Portable Luminescent Dissolved Oxygen Analyzer
Waltron User Manual
Advertisement
Table of Contents
