Reading The Measurement Results; Deleting Measurement Results; Product Choice - Waltron 9065C Instruction Manual


If the battery is fully charged, continuous oxygen measurements can be taken for
approximately 8 hours.
3. The continuous oxygen measurements can be stopped by pressing "Enter".

READING THE MEASUREMENT RESULTS

4.4
Procedure:
1. Press "Enter" for approximately 3 seconds.

The input menu will be displayed.
2. Press "Enter" again.

The main menu will be displayed.
3. Use the Down arrow button to select "Logbook" in the main menu and press "Enter".
4. Select "Results" in the logbook menu and press "Enter".
5. The measurement results can now be read. To select a different measurement, scroll up or
down through the measurement numbers.
6. Press "Enter" to return to the main menu.

DELETING MEASUREMENT RESULTS

4.5
Procedure:
1. Press "Enter" for approximately 3 seconds.

The input menu will be displayed.
2. Press "Enter" again.

The main menu will be displayed.
3. Use the Down arrow button to select "Logbook" in the main menu and press "Enter".
4. Select "Delete all results" in the "Logbook" menu and press "Enter".
5. The main menu will then be displayed.

PRODUCT CHOICE

4.6
The 9065C allows you to easily set product-specific settings.
The predefined products can be selected from the "Product choice" menu before a measurement
is carried out or they can be programmed in the key for the place ID.
The "Product choice" menu is accessed as follows:
1. Press "Enter" until the Waltron logo is displayed.
2. Press "Enter" again.

The main menu will now be displayed.
3. Use the arrow buttons to select the "Product choice" menu and press "Enter" to open the
menu.
4. Use the arrow buttons to scroll to one of the products and press "Enter" to select the
product and to return to the main menu.
Waltron User Manual
9065C Portable Luminescent Dissolved Oxygen Analyzer
Operation
24